Multiplies incremental encoder signals
Housing with clamping fixture (35 mm DIN rails)
1 input block, 3 output blocks
Options : Mutual decoupling of output blocks (OM 3-3Ai)
| Technical Data | |
| Attribute | Value |
| Product usage | Encoder signal outputs (HTL/TTL) multiplication |
| Supply voltage | 12-30 VDC |
| Signal input | HTL (square wave 12-30 V) or TTL (square wave 2.8-6 V) |
| Signal output | HTL or TTL (3 output blocks, optional for each output block: HTL or TTL level) 0°, 90°, N and respective inverted signals |
| Frequency range | 0 - 250 kHz |
| Casing | Electronic housing for standard mounting rail |
| Dimensions | 90 x 75 x 52 mm |
| Device temperature range | -20 °C to +70 °C |
| Degree of protection | IP20 |
| Electrical connection | 30 pole PHOENIX COMBICON screw terminals 2.5 mm² |
| Device options |
- Mutual decoupling of 3 output blocks (type OM 3-3Ai) with 3 separate supply voltage inputs - 2 and 4 fold pulses - Direction of rotation sensing - Standstill detection - Direction of rotation dependent output signals - Frequency division (2-32) |
| Mechanical options | |
| Special features and certificates | |
| The multipliers | |
| Output multipliers split incoming signals from incremental encoders before distributing them. They are equipped with three signal inputs (0°, 90° and reference pulse), which are distributed to nine signal outputs (HTL or TTL). Mutual decoupling of the output blocks is optionally possible (OM 3-3Ai). | |