Output of speed-dependent square wave pulses
1024 pulses per rotation / HTL or TTL
Output signals 0°, 90°, reference pulse and inverted signals
Transmission frequency up to 100 kHz / overload display
| Technical Data | |
| Attribute | Value |
| Supply voltage | 12-30 VDC |
| Signal outputs/Interfaces |
- HTL or TTL (0°, 90°, N, ERR and respective inverted) - Pulse rate: 1024 - Maximum frequency: 100 kHz - LED indicator: Overload at outputs |
| Electrical connection |
- Screw terminals to connect the incremental output signals - Series connectors to preceding and following modules (internal bus connection) |
| Dimensions | 99.5 x 22.5 x 114.5 mm (modular electronics housing for DIN rail) |
| Device temperature range | -25 °C to +70 °C |
| Degree of protection | IP20 (switchboard installation) |
| Device options | Combines with other modules belonging to the U-ONE System |
| Mechanical options | |
| Special features and certificates | UL/CSA |
| The speed signallers | |
| The incremental encoder modules for detecting speed offer three types of signals: shifted 90 degrees to the basic pulse phase, mechanically fixed reference pulse and inverted signals. | |