UO-SPN-1: Communicates safe position and speed to a safety controller via PROFIsafe protocol
UO-EPN-2: Communicates position and speed to a standard controller via PROFINET IO
Resolution 13 bit singleturn / 15 bit multiturn
Options: Without SIL/PL certification (UO-EPN-2); it is possible to combine 2 bus modules within a system
| Technical Data | |
| Attribute | Value |
| Supply voltage | Power supplied via controller module |
| Signal outputs/Interfaces |
- PROFINET IO | UO-EPN - PROFIsafe via PROFINET IO | UO-SPN - Resolution 13 bit singleturn / 15 bit multiturn - Bus addressing with rotary coding switch - Configurable functions: - UO-EPN: Counting direction - UO-SPN: Counting direction, standstill tolerance, preset, integration time safe/unsafe, size of monitoring window - LED indicators: Operating conditions/warning |
| Electrical connection | UO-EPN: RJ45 connector (2x) UO-SPN: M12 connector (2x) Internal bus connection to preceding and following modules |
| Dimensions |
- UO-EPN: 100 x 25 x 110 mm (modular electronics housing for DIN rail bus connector) - UO-SPN: 100 x 60 x 110 mm (modular electronics housing for DIN rail bus connector) |
| Device temperature range | -25 °C to +60 °C |
| Degree of protection | IP20 (switchboard installation) |
| Device options |
- Combines with other modules belonging to the U-ONE(-SAFETY)-LWL-System - Combine of 2 bus modules possible within one system (UO-EPN/SPN/EPB/SPB) |
| Mechanical options | - |
| Special features and certificates | USL(H) 42 and associated modules UO-S…: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849) |
| The new position signalers with PROFINET | |
| The communication modules of the U-ONE(-SAFETY) second generation transmit the position, speed and status data of the shafts that need to be monitored to a higher-level controller. They feature a PROFINET IO interface. In the UO-SPN safety design (certified up to SIL 2 / PL 2), the programmable parameters reference the counting direction, the idleness tolerance, the preset value, the integration time and the size of the monitoring window. In the UP-EPN standard design, only the counting direction can be parameterized. | |