The PRECIMA spring loaded brakes are electromagnetically actuated single disk brakes with two friction surfaces.
The braking power is applied by means of pressure springs.
The braking torque is generated in the currentless condition.
Ventilation (releasing) of the brake is effected electromagnetically.
In the absence of current, the compression springs (5), present in the magnet body (1) are pushing against the axially movable armature plate (2) which traps the brake rotor (3) against the motor housing surface (8). The brake torque is transferred to the shaft via the rotor and splined hub (4). By applying direct current voltage to the coil, a magnetic field is produced in the magnet body (1). This magnetic field attracts the armature plate (2) across air gap “a” and allows the rotor to rotate and neutralize the brake torque.
| The range of PRECIMA spring loaded brakes |
FDB Series : classic solid fail- safe brake in several variations for universal use available.
FLC Series : easy to assemble, low cost Holding Brake für applications with limited friction work.
FDD Series : low noise double brakes for applications with high safety requirements
FDR Series : double friction rotor brake for high torque requirements on limited mounting space
| Product information |
Standard voltages are: 24 VDC, 48 VDC, 103 VDC, 180 VDC and 205 VDC
special voltages are available on request
Standard cable: size 05 and 06 – AWG 24 Size 08 to 30 – AWG 19
The air gap „a” is preset
The spring loaded brakes, type FDW/FLC has a fixed air gap „a“ wich ist given through the dimensions of the parts
Fixed bearing not required on the side of the brake
Asbestos-free friction linings: Due to the special processing of the friction surface, the rated braking torques are achieved after a short running-in process
Standard: Protective rating IP 54 (mounted under the fan cowl of electric-motors).
| Assembly | |
| The spring loaded brake is supplied ready to be mounted. | |
| The air gaps for FLC, FDW are fixed without adjustment. | |
| The air gap of FDB, FDD and FDR brakes is preset before leaving our factory, they can be adjusted later without removing the brake from the motor. | |
| Accessories | |
| For triggering halfwave and bridge rectifiers, fast acting rectifiers, and current detection relays are available. | |
| Special solutions | |
| In case of special mechanical and electrical requirements with respect to the spring loaded brakes, please contact our domestic and international experts. | |